Floor Survey .10/psf (9ft grid)
We'll provide an accurate survey for estimating quantities.
- 3 hr3 hours
- Starting at .10/psfStarting at .10/psf
Getting a floor survey can save you thousands of dollars and should be done on every project getting new floors. Especially for new tile, where tile is getting larger and grout joints are getting smaller, the tolerances required can be dead flat to 1/8" over 10 feet. (This is usually set by the manufacturer, designer or architect. Billing is done at (.10/psf for a 9ft grid), (.12 for a 6ft grid), and (.15 for a 3 ft grid.) Min Charge $400 plus tax Whether you're looking for a floor survey for a third party assessment or for estimating quantities, a survey is a powerful tool for conveying a condition and to follow tolerance guidelines set by manufacturers, TTMAC or architects and designers. A survey can help sell a job or to help visualize the contours and elevations of the project and can also help with setting stair risers as well as door heights in critical builds, and in some cases sloping is required to save in material costs and, or constraints in build heights. Our surveys can be 3, 6, or 9ft elevation grid and our software accurately gives a bag count based on a good, better best scenario. Floor Surveys must also have an assessment performed at the same time to determine bond and substrate conditions. Give us a call to discuss your project. We are very knowledgeable in all aspects of flooring and levelling.
To cancel, please contact us 12 hours in advance.
1 (833) 748-3369
20162 70a Ave, Langley, BC V2Y 2Y6, Canada